When it comes to buying Ethernet cables, there are a few things that you need to know before you pull out your wallet. Not all Ethernet cables are created equal. There are many different types of cables on the market and it is important to know what is out there. Cat5e is the new standard for network cabling. Cat5e is a much better cable than Cat5, but it still has its limits. Cat6 is the new standard in cabling and Cat6 Cables have many advantages over Cat5e and Cat5. Cat6 is a big improvement over the last standard and is the only type of cable you should use in the future. The speed of your network is improved and the cable will last longer.
What are the different types of Cat6 cables?
There are a few different types of Cat6 cables, but the most common are solid and stranded. Solid cables have a single copper wire running through them, while stranded cables have multiple smaller wires twisted together. Both types are equally effective, but stranded cables are more flexible and can be easier to work with.
There are also shielded and unshielded Cat6 cables. Unshielded cables are more common, and they have a plastic coating around the copper wire. Shielded cables have an additional metal shield around the wire to protect them from interference. This can be important if you’re using your cable in a noisy environment, like near a power outlet or in an industrial setting.
Benefits of Cat6 Ethernet cables
Cat6 Ethernet cables are generally used in connecting high-end networking devices. You can use Cat6 networking cables to connect your computers to your router, switch, firewall, or printer. These cables can support higher bandwidth and longer distances making them just what you need to set up a top-of-the-line network.
How to install Cat6 Ethernet cable?
Most Cat6 Ethernet cable installations are the same as running Cat5e Ethernet cable. The only difference is that the RJ-45 connectors are larger and the cable is only slightly thicker. The tools and materials you will need for this installation are a flat-blade or Phillips screwdriver, a punch-down tool, a cable tester, a cable ripper or a pair of needle-nose pliers, and a cable puller. What you need to do is to install the UTP components into the patch panel based on their wire length and colour. Cut all of the UTP components to the length corresponding with their slot numbers. Punch down the RJ-45 connectors and wires, and then check the connection.
How to Save On Ethernet Cables
Buying in bulk is the best way to save money on your Ethernet Cables. Cables can be purchased online for cheap. You can also ask your friends and neighbours if they need any ethernet cables. You can also ask around in the office if anyone else needs some ethernet cables and ask if you can split the next bulk order.
How to test the Cat6 Ethernet cable you have purchased
Cat6 Ethernet cable can be tested by direct connection of the cables to the computer system. All you need to do is to connect one end of the cable to the system and the other end of the cable to the modem and the computer respectively. But if you are not sure about how to do the test, you can go to any computer store in your area and ask for a network cable testing tool. This is a device that is affordable and will help you to test it. It can be purchased from any computer store near you or from your local internet provider.
Add Comment