Cat1Solution: Hello, friends! This post will explain how to fix the “No bootable device detected” error on your Windows computer. Also, what are the causes of this “No Bootable Device Toshiba Laptop”error? How to troubleshoot it Step by Step.
How to fix “No Bootable Device Found”
You know that the first step in starting a computer system is to boot it. This is where the setup process begins to load the operating systems into Random Access Memory (RAM) and Basic Input (BIOS). The Output System takes charge. After the BIOS has accessed files from a bootable device, such as a hard drive, it displays different error messages depending on the type of error.
- You do not need a bootable device. Insert a boot disk and hit any key.
- Boot Device not found. Please install an operating program on your hard drive. Hard Disk (3FO)
- no boot device found. To reboot, press any key.
- There is no boot device available.
PXE E61 – Media Test Failure. Check cable or PXE M0F – Exiting the PXE ROM.
These error messages are most noticeable on the black screen when you turn on your computer. This is because the computer cannot boot normally. Before we can solve this problem, let’s first understand what could be causing it.
Learn how to fix a computer with no signal display problem.
The following causes can cause the “no boots device found” error in your computer:
- The BIOS boot sequence is incorrect
- The Master Boot Record (MBR), or boot sector, is damaged.
- Malware and virus attacks have occurred.
- Partitions on Hard Drives are corrupt.
- The Hard Disk is damaged.
- The Hard Drive is disconnected or is broken.
- There are 6 methods to fix the No bootable device detected error
- It is now easy to fix this problem once we know the root causes. Here are six ways to solve this problem.
POPULAR BLOG – 1603 Fatal Error During Installation
Power Hard Reset your computer.
- Reset BIOS Settings.
- Reset Hard Disk Connection.
- Hard Disk Health Check and Hard Drive Self-Test
- Reinstall Windows Operating System
- Replacing Hard Disk
- (1) Power Hard Reset your computer.
Power Hard Reset deletes all information from your computer’s memory. It also clears and reestablishes any connection between the BIOS and the hardware. Follow the steps below to reset your computer’s power.
Disconnect all peripheral devices, such as keyboard, mouse and USB drive. Also, take out the power cable. If you have a laptop, then also take out the battery.
For 15 seconds, press and hold on the Power Button.
Turn on additional computers by plugging in the power cable/battery.
(2) Reset BIOS setting.
If the problem persists, you can do a Power Hard Reset to reset the BIOS setting default. Sometimes, this error can be caused by a wrong boot sequence, boot priority, or boot device selection. You can also manually select Boot Device or Boot Priority, or reset the BIOS setting to default. This will allow it to automatically access the hard drive in the first boot device. Go to the BIOS and press F9 to reset the BIOS settings. To save, press F10 to save. Click on the link below to learn more about BIOS settings default and BIOS. How to configure bios settings
(3) Reset Hard Disk Connection.
After removing the power cable and SATA/PATA cables, clean and reinstall your hard disk. The problem could also be caused by the hard drive not being connected to the computer, loose cable connections, or the SATA/PATA cable becoming damaged. If this happens, you can try changing the cable one time. The computer may not be able to detect your hard disk because the power cable isn’t working.
(4) Do a Hard Disk and Hard Drive Self-Test to Check Your Health
If the hard drive is connected properly but the Boot Device Not Found error persists, check the hard drive’s health. If the Status is good, then your hard drive is in good condition. However, if there is any error then it is likely that your hard disk is malfunctioning. In such cases, Hard Drive Shelf Test can be performed. Hard Drive Shelf Test checks for errors on your hard drive and automatically fixes them. You can find this process below.
How to check disk for errors using chkdsk or Command Prompt
(5) Reinstall Windows Operating System
You may need to reinstall your operating system. Sometimes, the boot device is not found due to Windows becoming corrupt. Install an operating system to your hard drive. This error is a warning. Please reinstall the window to confirm.
Add Comment