Home » How to Connect a Mac to a Canon ix6820 Wireless Printer
Computers and Technology

How to Connect a Mac to a Canon ix6820 Wireless Printer

Canon Pixma ix6820 Printer

The Canon Pixma ix6820 Printer is identical to the Canon Pixma iX6520 Inkjet Business Printer. Among the few variations are a faster speed, lower text quality, and better photos. The most significant change is the capability for both wired and wireless networks. Single-function printers that can print on paper sizes other than letter and legal are hard to find for a home office.

A major advantage over the Epson WF-7010 is Wi-Fi connectivity. Also, it supports mobile printing from Android and iOS devices via Canon’s free apps, such as printing from the cloud or AirPrint. For mobile printing to work, the printer must be directly connected to a network via Ethernet.

The company isn’t great at handling paper. However, both tabloid and super tabloid paper can print up to 13 by 19 inches. You can’t load both letter and larger-size paper into the printer’s single paper tray, unfortunately. This printer does not come with a duplexer (for two-sided printing).

A single tray makes the Pixma iX6820 ideal as a backup printer for letter-size documents. That’s not enough for a single printer. That shouldn’t be an issue as a large-format backup printer. A duplexer and two 250-sheet trays are included in the Epson WF-7010.

Setup Procedures

The measurements are 6.3 by 23 by 12.3 inches (HWD), However, provided you have sufficient room, the setup is very basic. You must press a button-down and count flashes on the status light to adjust the printer’s default network connection configuration (which is set to allow it to connect via Wi-Fi) to allow it to connect via Ethernet instead. There is no magical decoder ring included with the printer, as Canon Pixma ix6820 Printer fails to include it in the quick-start guide. In my experience, if you don’t see it or can’t run the setup application, as I did, you won’t know how to get the wired network connection to function, according to the corporate representative I spoke with. Switching between wired and wifi settings is straightforward once you grasp the process. According to a Canon spokeswoman, the business is looking into various solutions to the problem.

While text and graphics from the printer were somewhat below average, photos from the printer were marginally above. For tabloid-capable inkjet printers, text production was at the low end of the spectrum. Most people think they’re fine for most commercial purposes as long as you don’t need small fonts.

Canon Pixma ix6820 Printer Setup

Instructions for installing the Canon Pixma ix6820 Printer on Windows and Mac are available here.

Setup Canon Pixma ix6820 Wireless

Note the Canon ix6820 wireless printer setup instructions.

  1. Turn on your Canon Pixma ix6820 Printer.
  2. Verify that the access point’s button is ready.
  3. The printer’s WiFi button (A) should blink once. Hold the WiFi button for one flash.
  4. make sure the blue WiFi light flashes and the white power light shines.
  5. Then hold the access point’s button.
  6. Finally, the user must turn on both the blue WiFi and white power lamps.
  7. You have now finished configuring your wireless network.

Canon ix6820 Wireless Printer Setup

Follow these steps to wirelessly set up your Canon Pixma ix6820 Printer on Windows.

  1. Before starting the wireless setup, make sure the printer, router, and Windows PC are all on.
  2. Connect your Canon Pixma ix6820 Printer to your wifi router.
  3. Now download the printer driver for Windows.
  4. Double-click the driver software package choice to start the setup. Then finish the installation.
  5. Open Control Panel using Windows search.
  6. Select “Devices and Printers” in the next box.
  7. Click the “Add Printer” section on the left side of your Windows screen. Choose your printer from the list and wait a few seconds.
  8. Once added, the printer will display in the device and printer area. Now is the time to print.

Technique Wire (Canon Pixma ix6820)

Note the Canon Pixma ix6820 Printer wired connection steps.

  1. Turn on your Canon Pixma ix6820 Printer. The white power lamp will be lit.
  2. An ethernet cable is required. Remove the cap (B) from the upper port on the right side of your Canon Pixma ix6820 printer.
  3. Connect the printer to the network device via ethernet connection (C). Make sure it’s not a USB port.
  4. Restart your computer by pressing the Resume/Cancel button eleven times. Release the Resume/Cancel button after the eleventh flash, and your wired connection is ready.
  5. Now download the printer driver for Windows.
  6. After the download, select the driver package option to install. Continue with the installation as instructed on-screen.
  7. Pressing OK will bring up the Run dialogue box.
  8. Select “Devices and Printers” from the next box.
  9. Click “Add a printer” in the top left corner. You can now see a list of installed printers.
  10. Wait a few seconds and select your printer. Last but not least, your Canon Pixma ix6820 Printer will appear under ‘Devices & Printers’.

How to Connect a Canon ix6820 Printer to a Mac

Follow these steps to wirelessly set up a Canon Pixma ix6820 Printer on a Mac.

  1. If you have a wireless printer, make sure you connect it to the same network as your system.
  2. As stated earlier, connect your printer to your WiFi network.
  3. Now you must update your printer driver. To install the driver, follow the on-screen instructions.
  4. Apple>System Preferences
  5. On the next screen, select “Printers and Scanners”.
  6. Click the plus sign (+) in the bottom left of the prompt screen.
  7. Select your printer from the drop-down list and wait a few seconds for the connection.
  8. Now you can print from your Canon Pixma ix6820 Printer on your Mac!

How to Fix The Pixma IX6820 cannot print.

  1. Several factors can contribute to this issue, including incorrect installation, empty cartridges, print settings, and an outdated
  2. First, turn on your printer.
  3. Flash the power lamp. Wait until the Power lamp stops flashing.
  4. Check that the USB cable is correctly inserted into both the printer and the computer if you used one.
  5. Inspect your cable for damage and replace it if necessary.
  6. Then, open the ‘Print’ dialogue box and pick the printer name.
  7. From your PC’s printer and driver folder, choose the Ports tab and double-check that the correct port is selected.
  8. Now print a test. Continue to update or reinstall the printer driver and restart your printer.

 

About the author

goerrors

Add Comment

Click here to post a comment