Home » What are the different kinds of Composite Decking Clips?
Construction Home Improvement

What are the different kinds of Composite Decking Clips?

What are the different kinds of Composite Decking Clips?

You may use several types of composite decking clips to secure your decking to the joists beneath it. If you’re going to use clips or not, it depends on how you’re going to install your composite decking. The open fastening method is one of the ways for installing composite decking. Screws or nails are used in the open fastening method, which exposes the screw or nailhead to the surface. Despite the fact that there are techniques to conceal the screw heads, most homeowners would rather not use them. This is because they want a completely smooth surface with no traces. The concealed fastener method, which includes inserting the clips and screws in between the decking boards, is another way to install composite decking. 

When you’re finished building your deck, this procedure assures a flat surface. It also guarantees that there is sufficient space between the decks for expansion and contraction. It’s significant because komposittrall expands and contracts at various temperatures, and the hidden fasteners make it easier for them to do so. This is limited by the surface fastener, which might cause the decking to shatter if it is a wooden deck. Hidden fasteners, which are a mix of clip and screw, are used with grooved composite decking. The clips will be used to secure the board to the frame, which will be secured with screws. The many types of composite deck clips and their functions will be discussed in the next section.

Types of Composite Decks Clips 

Composite decking clips are divided into two categories. The starting clips and T-clips are the two types of clips. The differences between the two types of clips will be discussed further down.

Starter Clips 

Starter Clips 

The starter clips are composed of stainless steel and are used to secure composite decks. Outdoor decking starter clips Furthermore, they are designed in such a way that they may be screwed down to the joist while hooking the groove to keep the decking securely in place. Installing your deck with the starter clip is simple. All you have to do now is place it on the joist and tighten it. This may be done after the frame has been set on a firm base. It takes some talent to lay the foundation and arrange the frame, but don’t worry; you can do it yourself. The beginning clip is used to hold the initial set of kompositbrädor close to your building or wall in place. In addition, the starter clips can be utilized to keep the last deck in place. The starting clips should be inserted every 600mm on the initial set of boards to ensure that they are kept securely in place.

T-shaped Clips 

Your composite deck planks are held to the joists using T-shaped clips. It’s fashioned like a T so that the two sides of the head can simultaneously hold down two decks. outdoor decking t-clips The T-shaped clamps appear to be positioned between decks. Through the T-clips, there is a location where you may insert your screw. T-clips are created by a variety of manufacturers and are constructed of a variety of materials. The width of the T-clips, and therefore the distance between your composite decks, is determined by the materials used to make them. The vertical points of those made of stainless steel are thinner.

Consider the letter T for a better understanding of the vertical point; you’ll recall that it has two pieces. The top of the letter T, which travels horizontally and rests on the vertical portion, is one of its parts. When discussing T- clips, the vertical component refers to the vertical point. The vertical point of a starting clip made of plastic will be broader and wider than one made of stainless steel. There are steel T-clips with a width of 3mm and plastic T-clips with a width of 6mm. This implies that when you install your composite decks using 3mm T-clips, you’ll have a 3mm gap between the deck boards. The 6mm T-clips are the same way.


T-clips and starting clips are two different types of composite deck clips that are available on the market.

About the author


Add Comment

Click here to post a comment